Clutch pilot tool - using the clutch alignment tool can take a lot of the headache out of installing an engine. instead of eyeballing to see if the clutch is centered, simply install the clutch alignment tool into clutch disc, and tighten the pressure plate (a turn per bolt, rotate around).. Vw mkiv clutch kit installation instructions mkiv clutch kit the ecs tuning clutch kit is a lightweight replacement for the factory-installed vw mkiv dual mass flywheel. the single mass flywheel conversion kit bolts directly to the crankshaft without modification, and comes with. Clutch installation kit includes grade 8 bolts, wavy washers and a clutch pilot tool..
Clutch removal and installation this article was used with permission from: rob and dave’s air-cooled vw pages note: any time the engine is removed, check the clutch for wear and replace worn components as necessary.. Install the release plate, retaining ring, and clutch disc. use special tool vw 547 or equivalent to center the clutch disc. install the flywheel, tightening the bolts one or two turns at a time in a crisscross pattern to prevent distortion.. Vw mk4 clutch kit installation instructions introduction: the ecs tuning clutch kit is a lightweight replacement for the factory-installed vw mk4 dual mass flywheel. the single mass flywheel conversion kit bolts directly to the crankshaft without modification, and comes with a mating clutch package that includes friction disc, pressure plate.
Tidak ada komentar:
Posting Komentar